Please note: We accept payment in the form of credit and/or debit cards. All major brands accepted.

Product Catalog

Description

The RentalPro 230 is a solid workhorse sprayer with performance points to cover both interior and exterior painting needs. Lightweight and portable, the RentalPro 230 is the ideal airless paint sprayer for the homeowner DIY'er and professional contractors.

Rent from $75.00

Description

The Dri-Eaz 1200 Dehumidifier removes 65 pints of water daily and is a rugged machine that is e-z to transport and great for the homeowner.

Rent from $50.00

Description

Step up to the tough and dependable RoofPro™455XP Coil Nailer. It's loaded with the features you asked for, yet is light enough for one-handed operation.

Use for: Roofing, Installation & Repair, **Optional Attachment for vinyl and aluminum siding.** - See more at: http://www.senco.com/tools/details-page/roofpro-trade-455xp#sthash.WCUCUwMg.dpuf

Rent from $22.00

Description

The Kushlan Products 350 Mixer is filled with features that makes this rugged mixer affordable yet ideal for the do-it-yourselfer or professional. Electric-driven, 21 RPM mixers can swivel 360° and can be discharged in any direction. Supported by a durable steel frame, the drums are adjustable to the correct angle for a variety of mixes. The 5/16" thick polyethylene drums are resistant to dents, cracks, and rust yet easy to clean. Easy breakdown for transport or storage, the 3.5 cu. ft. drum holds 2 bags of premix concrete.

Rent from $40.00

Description

Electric Wallcovering Steamer for easy removal of wall coverings.

Rent from $24.00

Description

Wallcovering Perforator tool designed by wallpaper professionals to make projucts fo smoother & faster. Helps save time and minimize problems.

Rent from $2.00

Description

No matter how large or small the job, these single phase submersible pumps offer the versatility and durability contractors need for light dewatering. This comprehensive family of pumps offers large pump features for a small pump investment.

Rent from $20.00

Description

Designed for the compaction of asphalt as well as granular and mixed materials with some cohesive content in confined areas such as parking lots, highway and bridge construction, next to structures, curbs and abutments. Large capacity polyethylene water tank located within the front lift cage for protection and is semi-transparent for easy check of the water level. Large in-tank water filter.

Rent from $65.00

Description

The WM 100 engine features a special governor system, carburetor linkage, breather system and piston rings to provide maximum performance. Exclusive air filter compensation system allows for longer run time between filter changes.

Rent from $75.00

Description

Designed and built with the most advanced technology, these walk behind trowels offer high quality concrete finishing plus added gyroscopic safety sensor and patent-pending engine speed limiter provide tripple protection for the operator. This unique system minimizes a runaway handles situation.

Rent from $70.00

Description

Rust-Oleum Marking Wand. Lightweight durable steel and plastic construction, comfortable grip for easy marking.

Rent from $5.00

Description

The 470 Portamatic TL pneumatic flooring nailer is designed to nail ¾” thick wood flooring and includes a shoe pad for nailing ½” wood flooring Designed to accept 1-1/ 2 or 2” Flooring nails T OR L Flooring nails. You choose the Porta-Nail flooring fastener T or L based on the style you are now using or style that is readily available to you. Operates at 70-90 PSI @ 3.5 cfm. A light tap of the mallet ensures the Porta-Nail is set tight in the proper location every time for a wood floor that stays put. The Portamatic TL is light weight; easy to use has an integrated safety to prevent accidental discharge. Porta-Nails 16 ga. flooring nails are made of the finest materials and well defined serrated barbs to provide superior holding power and will not let go. Porta-Nails are also available in stainless steel for ACQ treated materials. 

Rent from $25.00

Description

The easy to use 461A Flooring Stapler is the fast and cost effective way to secure 1/ 4 In. to 5/8 In Engineered and Bamboo Wood Flooring, Today’s floors can present installation challenges due to the various dimensional profiles of the flooring. PNI’s commitment to provide solutions for the hardwood flooring installer is once again displayed with this easy to use Stapler that will adjust for various thicknesses and will accommodate three different lengths of fasteners. Bamboo and Engineered floors are easy to install and stay in place when stapled into proper sub floor systems. The 461A uses 1 In. to 1-9/16 In. 18 ga 1/4 In. crown staples. The 18 gauge staple provides superior holding power and its thin profile can help to prevent de-lamination of engineered flooring. The 461A’s adjustable shoe bases along with the adjustable Elevator Platform, for fine tuning the position of the staple, give you the versatility to obtain professional installation results.

Rent from $14.00

Description

13.1 CFM @ 100 PSI, Wheelbarrow Compressor, 8 Gallon Storage Capacity, 196cc Honda GX200 OHV With Low Oil Shut Down, Stainless Discharge Hose.

Rent from $28.00

Description

2 HP 110V Twin Stack Compressor, 4.1 CFM @ 100 PSI, Stainless Discharge Hose.

Rent from $25.00

Description

• Miter Angle Digital Readout- provides repeatable accuracy to 0.1°. 
• Miter Angle Fine Adjust with Detent Override, makes it simple to dial-in precise miter angles. 
• Dual Integral Jobsite Lights fully illuminate the work piece and cut line from either side of the blade. 
• Powerful 15.0 Amp, 3.3 Max HP Direct Drive Motor provides increased power for high performance cutting in hard lumber. 
• Constant Power Technology with Soft Start -maintains constant cutting speed under load and decreases start up head movement. 
• Oversized Single Lever Bevel Adjustment with (9) Positive Bevel Stops allows the saw to easily bevel left and right 0°- 48°and provides fast and accurate adjustments

Rent from $25.00

Description

L.B. White Tradesman gas-fired heaters are engineered and manufactured in the USA to deliver reliable, directional forced air heat for temporary heating needs. They feature a unique 3-trial ignition system and the industry's heaviest gauge combustion chamber and burner plate.

Rent from $25.00

Description

JET 12-1/2-Ton Capacity Hydraulic BOTTLE JACK -- JET JHJ Series bottle jacks are used for multiple applications: pushing, bending, pressing, or straightening. With base and cylinder electrically welded together to assure strength and eliminate leaks, extreme temperatures do not affect them. The JET low profile truck models or standard models vary in capacities from 12-1/2 tons to 100 tons. All JHJ Series bottle jacks comply with ANSI/ASME B30.1 and PALD-1 standards. 

Rent from $8.00

Description

Jet Turning Bar fits SJ-15 and SJ-20, 3/4" x 36"

Rent from $1.00

Description

JET 20-Ton Capacity SJ Series SCREW JACK -- Contractor quality mechanical jack for all-purpose lifts and supports. Holds heavy loads indefinitely - will not creep. Heavy-duty bell shaped cast base. Less effort required to lift capacity load with new design. Corrugated steel swivel head turns easily under load. Easy to carry and position with built-in handle. Compliance: ANSI/AMSE B30.1 standards
Turning bar is optional. 

Rent from $8.00

Description

INCLUDES TOOL AND CART PLUS (1) TE-H28P SM40 CHISEL AND (1) TE-H28P FM40 CHISEL

Rent from $50.00

Description

High-performance concrete demolition hammer featuring low vibration and brushless motor for longer life, suitable for working on walls and floors.

Use for demolishing concrete and masonry at floor level or below waist level, renovating floors of all kinds, removing tiles, bushing and compacting, and corrective chiseling such as adjustments to door and window openings.

Rent from $50.00

Description

Use for drilling anchor and through-holes in concrete and masonry in the 12-100 mm diameter range, recommended diameter range 18-40 mm, medium-duty demolition work, coring in masonry and concrete with TE-Y BK core bits up to 4" diameter, coring in masonry with DD-B PCM core bits up to 4" diameter, and coring in masonry with DD-B PCM core bits up to 100 mm diameter.

Rent from $45.00

Description

Use for drilling and hammer drilling in concrete and masonry, percussion core drilling in masonry 1" to 2-5/8" dia. range, and cutting socket recesses in the 25–68 mm dia. range in masonry.

Rent from $25.00